Other information:
Removal
NOTE:
Removal steps in this procedure may contain installation details.
Remove the B-pillar trim panel.
Refer to: B-Pillar Trim Panel (501-05 Interior Trim and Ornamentation, Removal and Installation).
Remove the bolt.
Torque:
30 lb.ft (40 Nm)
Rotate the seatbelt shoulder height adjuster to release the locking tab..
B0050:11, B0050:12, B0050:13 and B0050:1D
Refer to Wiring Diagrams Cell 46 for schematic and connector information.
Normal Operation and Fault Conditions
The RCM monitors the driver safety belt buckle switch circuits for the following faults:
Open circuit
Short to voltage
Short to ground
Current out of range
Faulted driver saf..