Ford Fiesta Manuals

Ford Fiesta: Climate Control System / Climate Control System - General Information

Ford Fiesta 2014 - 2019 Service Manual / Climate Control System / Climate Control System - General Information

Climate Control System

..

Specifications

  Lubricants, Fluids, Sealers and Adhesives   Specifications Motorcraft® PAG Refrigerant Compressor Oil / YN-12-D WSH-M1C231-B Motorcraft® R-134a Refrigerant / YN-19 (US); CYN-19-R (Canada); MYN-19 (Mexico) WSH-M17B19-A Motorcraft® A/C System Flushing Solvent / YN-23 ..

Other information:

Ford Fiesta 2014 - 2019 Service Manual: Input Shaft Seal. Removal and Installation


Special Tool(s) / General Equipment 308-847Installer, Inputshaft Seal Center Punch Adhesive Tape Removal Remove the transmission. Refer to: Transmission (308-03B Manual Transmission - 6-Speed Manual Transmission – B6, Removal). Remove the bolts and the slave cylinder. NOTICE:..

Ford Fiesta 2014 - 2019 Service Manual: Module Controlled Functions - System Operation and Component Description. Description and Operation


System Operation Battery Saver NOTE: Time-out is 60 seconds if the vehicle is in factory mode or in transport mode. To save battery voltage, the BCM provides automatic shut-off of the courtesy and demand lamps after a time-out period when the ignition is OFF. For specific information of the battery saver feature for the interior lamps, Refer to: Interior Lighting - System..

Categories

Component Bleeding. General Procedures

Special Tool(s) / General Equipment

Master Cylinder Bleeding Set

Bleeding

NOTICE: If the fluid is spilled on the paintwork, the affected area must be immediately washed down with cold water.

Master Cylinder

NOTE: When a new brake master cylinder has been installed, it should be primed to prevent air from entering the system.

NOTE: Make sure the area around the master cylinder cap is clean and free of foreign material.

Remove the brake fluid reservoir cap.

read more

Copyright © 2026 www.fofiesta7.com