Ford Fiesta Manuals

Ford Fiesta: Climate Control System

Ford Fiesta 2014 - 2019 Service Manual / Climate Control System

Accelerator Pedal. Removal and Installation

Removal NOTE: Removal steps in this procedure may contain installation details. NOTE: To prevent setting Diagnostic Trouble Codes (DTCs), make sure the ignition switch is in the OFF position prior to disconnecting the accelerator pedal electrical connector...

Climate Control System - General Information

..

Other information:

Ford Fiesta 2014 - 2019 Service Manual: Cylinder Head. Removal and Installation


Special Tool(s) / General Equipment Strap Wrench Oil Drain Equipment Hose Clamp Remover/Installer Materials Name Specification Motorcraft® Metal Surface Prep WipesZC-31-B -  Engine Oil - SAE 5W-20 - Synthetic Blend Motor OilXO-5W20-Q1SP WSS-M2C945-B1  Removal Refer to: Jacking and Lifting - Over..

Ford Fiesta 2014 - 2019 Service Manual: Hood Latch. Removal and Installation


Removal NOTE: Removal steps in this procedure may contain installation details. Remove the bolts and the hood latch from the core support. Torque: 80 lb.in (9 Nm) Remove the front hood latch. If equipped. Disconnect the hood ajar switch electrical connector and position aside the wiring harness. ..

Categories

Brake Master Cylinder. Removal and Installation

Removal

NOTICE: If the fluid is spilled on the paintwork, the affected area must be immediately washed down with cold water.

NOTE: Removal steps in this procedure may contain installation details.

All vehicles

Remove the battery tray.
Refer to: Battery Tray - 1.6L Duratec-16V Ti-VCT (88kW/120PS) – Sigma (414-01 Battery, Mounting and Cables, Removal and Installation).
Refer to: Battery Tray - 1.6L EcoBoost (132kW/180PS) – Sigma (414-01 Battery, Mounting and Cables, Removal and Installation).
Disconnect the vacuum tube from the brake booster and detach the routing clip.

read more

Copyright © 2024 www.fofiesta7.com