Ford Fiesta Manuals

Ford Fiesta: Climate Control System - General Information / Air Conditioning (A/C) Compressor Outlet Line - 1.6L EcoBoost (132kW/180PS) – Sigma. Removal and Installation

Ford Fiesta 2014 - 2019 Service Manual / Climate Control System / Climate Control System - General Information / Air Conditioning (A/C) Compressor Outlet Line - 1.6L EcoBoost (132kW/180PS) – Sigma. Removal and Installation

Removal

NOTE: Removal steps in this procedure may contain installation details.

  1. Recover the refrigerant.
    Refer to: Air Conditioning (A/C) System Recovery, Evacuation and Charging (412-00 Climate Control System - General Information) .
  1. With the vehicle in NEUTRAL, position it on a hoist.
    Refer to: Jacking and Lifting - Overview (100-02 Jacking and Lifting, Description and Operation).
  1. NOTICE: Make sure that all openings are sealed.

    Remove the A/C compressor outlet line nut and disconnect the fitting.
    Torque: 159 lb.in (18 Nm)
  1. NOTICE: Make sure that all openings are sealed.

    Remove the A/C compressor outlet line nut, disconnect the fitting and remove the A/C compressor outlet line.
    Torque: 80 lb.in (9 Nm)

Installation

NOTE: Install new O-rings seals.

  1. To install, reverse the removal procedure.
  1. Lubricate the refrigerant system with the correct amount of clean PAG oil.
    Refer to: Refrigerant Oil Adding (412-00 Climate Control System - General Information) .

    Air Conditioning (A/C) Compressor Inlet Line - 1.6L EcoBoost (132kW/180PS) – Sigma. Removal and Installation

    Removal NOTE: Removal steps in this procedure may contain installation details. Recover the refrigerant. Refer to: Air Conditioning (A/C) System Recovery, Evacuation and Charging (412-00 Climate Control System - General Information) ...

    Air Conditioning (A/C) Pressure Transducer - 1.6L EcoBoost (132kW/180PS) – Sigma. Removal and Installation

    Removal NOTE: Removal steps in this procedure may contain installation details. With the vehicle in NEUTRAL, position it on a hoist...

    Other information:

    Ford Fiesta 2014 - 2019 Service Manual: Ignition Switch - Vehicles With: Keyless Entry and Push Button Start. Removal and Installation


    Removal NOTE: Instrument panel center upper trim panel with 6.5 inch screen shown, 4.2 inch screen similar. Release the clips and remove the instrument panel center upper trim panel. Release the clips, remove the bolts and the FCIM , media bin and center register assembly...

    Ford Fiesta 2014 - 2019 Service Manual: Steering Wheel and Column Electrical Components - System Operation and Component Description. Description and Operation


    System Operation System Diagram - Conventional Ignition Switch Item Description 1 START 2 ACC or ON 3 ON or START 4 IPC 5 Floor Shifter 6 Ignition Switch 7 Ignition Key Inhibit Solenoid 8 PCM 9 BCM 10 CJB 11 Ignition Relay 12 Fuses ..

    Categories

    Brake Backing Plate. Removal and Installation

    Removal

    NOTE: Removal steps in this procedure may contain installation details.

    Remove the brake shoes.
    Refer to: Brake Shoes (206-02 Drum Brake, Removal and Installation).
    Disconnect the brake tube fitting.
    Torque: 159 lb.in (18 Nm) Remove the bolt and wheel cylinder.
    Torque: 106 lb.in (12 Nm) Disconnect the brake shoe lever fitting and re

    read more

    Copyright © 2024 www.fofiesta7.com