Ford Fiesta: Suspension / Rear Suspension

Front Strut and Spring Assembly. Disassembly and Assembly

Special Tool(s) / General Equipment Spring Compressor Vise Materials Name Specification Motorcraft® Silicone Brake Caliper Grease and Dielectric CompoundXG-3-A ESA-M1C200-AESE-M1C171-A  DISASSEMBLY   WARNING: Coil springs and strut assemblies are compressed under extreme load...

Rear Suspension - Component Location. Description and Operation

NOTE: Base model shown, ST similar. Item Description 1 Shock absorber 2 Spring 3 Twist-beam rear axle 4 Twist-beam rear axle receiver bearing ..

Other information:

Ford Fiesta 2014 - 2019 Service Manual: Front Bumper Cover. Disassembly and Assembly

DISASSEMBLY NOTE: Disassembly steps in this procedure may contain assembly details. Remove the front bumper cover. Refer to: Front Bumper Cover (501-19 Bumpers, Removal and Installation). NOTE: The ST foglamp bezel is shown, the base foglamp bezel is similar. On both sides. Remove the screws and the fog lamp. ..

Ford Fiesta 2014 - 2019 Service Manual: Brake System Pressure Bleeding. General Procedures

Special Tool(s) / General Equipment Brake/Clutch System Pressure Bleeder/Filler Fluid Container Bleeding All vehicles NOTICE: If the fluid is spilled on the paintwork, the affected area must be immediately washed down with cold water. NOTE: The HCU bleeding procedure and a second brake system pressure bleed must be carried out if a new HCU has been install..