Removal
NOTE:
Removal steps in this procedure may contain installation details.
Remove the clips and the liftgate trim panel.
If equipped.
Disconnect the electrical connector and position aside the wiring harness...
Removal
NOTICE:
If the fluid is spilled on the paintwork, the affected area must be immediately washed down with cold water.
NOTE:
Removal steps in this procedure may contain installation details.
All vehicles
Remove the battery tray...
NOTE:
Removal steps in this procedure may contain installation details.
NOTE:
This step is only necessary when installing a new component to the left-hand side.
Remove the nuts and position aside the remote brake fluid reservoir.
Torque:
62 lb.in (7 Nm)
Remove the strut and spring assembly upper mount nuts.
Torque:
22 lb.ft (30 Nm)