Special Tool(s) /
General Equipment
310-250Disconnect Tool, Fuel LineTKIT-2012A-FLTKIT-2012A-ROW
Disconnect
NOTICE:
When reusing liquid or vapor tube connectors, make sure to
use compressed air to remove any foreign material from the connector
retaining clip area before separating from the tube or damage to the
tube or connector retaining clip can occur...
Other information:
B007E:11, B007E:12, B007E:13 and B007E:1A
Refer to Wiring Diagrams Cell 46 for schematic and connector information.
Normal Operation and Fault Conditions
The RCM continuously monitors the driver safety belt retractor pretensioner circuits for the following faults:
Resistance out of range
Unexpected voltage
Short to ground
Faulted driver s..
Removal
NOTE:
The 40 percent backrest must be removed before the 60 percent backrest can be removed.
NOTE:
Removal steps in this procedure may contain installation details.
All seats
Lower the backrest.
Rotate the backrest hinge locking arm rearward and release the backrest.
Remove the RH seat backrest.
..