Ford Fiesta: Fuel System - General Information - 1.6L EcoBoost (132kW/180PS) – Sigma / Specifications
General Specifications
| Item | Specification |
|---|---|
| Fuel Pressure | |
| Engine running | 55 psi ( 380 kPa) |
| Fuel Tank Capacity | 12.42 gal ( 47 L) |
Fuel System - Overview. Description and Operation
Overview
The fuel system:
is a variable speed Closed Loop Pressure Control (CLPC)
Fuel System with Gasoline Turbocharged Direct Injection (GTDI)...
Other information:
Ford Fiesta 2014 - 2019 Service Manual: Anti-Lock Brake System (ABS) and Stability Control - Overview. Description and Operation
The ABS and stability control systems are comprised of the following subsystems which assist the driver in maintaining control of the vehicle: ABS EBD Traction control Electronic Stability Control (ESC) Hill start assist The ABS helps maintain steering control by preventing the wheels from locking up during hard braking...
Ford Fiesta 2014 - 2019 Service Manual: Headlamp Assembly. Removal and Installation
Removal NOTE: Removal steps in this procedure may contain installation details. Disconnect the headlamp electrical connector. Remove the bolt and remove the headlamp assembly. Torque: 44 lb...
Categories
- Manuals Home
- Ford Fiesta Service Manual (2014 - 2019)
- Service Information
- Engine. Assembly
- Engine - 1.6L EcoBoost (132kW/180PS) – Sigma
- Front Strut and Spring Assembly. Removal and Installation
- Transmission Fluid Level Check. General Procedures
Component Bleeding. General Procedures
Special Tool(s) / General Equipment
Master Cylinder Bleeding SetBleeding
NOTICE: If the fluid is spilled on the paintwork, the affected area must be immediately washed down with cold water.
Master Cylinder
NOTE: When a new brake master cylinder has been installed, it should be primed to prevent air from entering the system.
NOTE: Make sure the area around the master cylinder cap is clean and free of foreign material.
Remove the brake fluid reservoir cap.
Copyright © 2025 www.fofiesta7.com