Ford Fiesta: Seatbelt Systems / Rear Center Seatbelt Retractor - 5-Door. Removal and Installation
Removal
NOTE:
Removal steps in this procedure may contain installation details.
-
Remove the 60 percent backrest.
Refer to: Rear Seat Backrest (501-10 Seating, Removal and Installation).
-
Remove the rear center seatbelt guide bezel.
-
Remove the bolt and the seat backrest hinge.
Torque:
28 lb.ft (38 Nm)
-
On both sides.
Remove the child safety seat tether anchor covers.
-
Release the J-clip, unzip and invert the backrest cover.
-
-
Lift the backrest cover.
-
Remove the seatbelt retractor bolt.
Torque:
35 lb.ft (48 Nm)
-
-
Remove and discard the bolt retainer.
-
Route the seatbelt through the guide.
-
Remove the rear center seatbelt retractor.
Installation
-
NOTE:
During installation, make sure the seatbelt webbing
is not twisted and the seatbelts and buckles are accessible to the
occupants.
To install, reverse the removal procedure.
-
Check the seatbelt system for correct operation.
Refer to: Seatbelt Systems (501-20A Seatbelt Systems, Diagnosis and Testing).
Removal
NOTE:
Removal steps in this procedure may contain installation details.
Remove the rear seat cushion.
Refer to: Rear Seat Cushion (501-10 Seating, Removal and Installation)...
Removal
NOTE:
Removal steps in this procedure may contain installation details.
Remove the upper C-pillar trim panel.
Refer to: C-Pillar Upper Trim Panel - 5-Door (501-05 Interior Trim and Ornamentation, Removal and Installation)...
Other information:
Removal
NOTE:
Removal steps in this procedure may contain installation details.
Remove the wheel and tire.
Refer to: Wheel and Tire (204-04A Wheels and Tires, Removal and Installation).
Remove the retainers...
Removal
NOTE:
Removal steps in this procedure may contain installation details.
Refer to: Driver Airbag (501-20B Supplemental Restraint System, Removal and Installation).
Remove the screws.
Using a suitable flat-bladed tool, remove the steering wheel bezel...