Ford Fiesta: Wheels and Tires / Specifications

Ford Fiesta 2014 - 2019 Service Manual / Suspension / Wheels and Tires / Specifications

Material

Item	Specification	Fill Capacity
Material: Motorcraft® High Temperature Nickel Anti-Seize Lubricant / XL-2	—	—
Material: Motorcraft® Wheel and Tire Cleaner / ZC-37-A	—	—

Item	Specification
Tire Inflation
Tires	See Safety Certification Label on driver door jamb
Wheel Weights
Wheel weight type	Use a wheel weight manufacturer's rim gauge to determine the correct wheel weight application

Torque Specifications

Item	Nm	lb-in
Valve stem-to-TPMS sensor screw	1.5	13
Wheel nutsa	—	—

aRefer to the procedure in this section.

Wheels and Tires

Safety Precautions - Overview. Description and Operation

Overview WARNING: Before beginning any service procedure in this section, refer to Safety Warnings in section 100-00 General Information...

Other information:

Ford Fiesta 2014 - 2019 Service Manual: Front Door Speaker. Removal and Installation

Removal NOTE: Removal steps in this procedure may contain installation details. Remove the front door trim panel. Refer to: Front Door Trim Panel (501-05 Interior Trim and Ornamentation, Removal and Installation). Remove the bolts and the speaker...

Ford Fiesta 2014 - 2019 Service Manual: External Controls - Overview. Description and Operation

Overview The manual transmission external controls consists of the following: Gearshift Cables shift cable selector cable Gearshift lever Gearshift lever knob and boot Transmission shift lever Transmission selector lever System Operation The manual transmission is controlled by a floor-mounted gearshift lever..

Axle. Removal and Installation

Special Tool(s) / General Equipment

Flat Headed Screw Driver Transmission Jack Vehicle/Axle Stands

Removal

NOTICE: Suspension fasteners are critical parts that affect performance of vital components and systems. Failure of these fasteners may result in major service expense. Use the same or equivalent parts if replacement is necessary. Do not use a replacement part of lesser quality or substitute design. Tighten fasteners as specified.

Remove the floor console.
Refer to: Floor Console (501-12 Instrum