Ford Fiesta: Engine Ignition - 1.6L EcoBoost (132kW/180PS) – Sigma / Engine Ignition - Component Location. Description and Operation

Ford Fiesta 2014 - 2019 Service Manual / Engine / Engine Ignition - 1.6L EcoBoost (132kW/180PS) – Sigma / Engine Ignition - Component Location. Description and Operation

1.6L EcoBoost

Item	Description
1	Ignition coil-on-plug(s)
2	Spark plug(s)

Specifications

General Specifications Item Specification Spark plug 12405 Spark plug gap 0...

Engine Ignition - System Operation and Component Description. Description and Operation

System Operation For System Operation, Refer to Powertrain Control/Emissions Diagnosis (PC/ED) manual. See Section 1 Description and Operation...

Other information:

Ford Fiesta 2014 - 2019 Service Manual: Warning Chimes - System Operation and Component Description. Description and Operation

System Operation System Diagram Item Description 1 HS-CAN 2 MS-CAN 3 Belt-Minder® chime 4 Door ajar chime 5 Headlamps on chime 6 Key-in-ignition chime 7 Parking brake chime 8 Safety belt chime 9 Turn signal on tick-tock tone 10 Ignition switch (without..

Ford Fiesta 2014 - 2019 Service Manual: Passive Anti-Theft System (PATS) Front Antenna. Removal and Installation

Removal Remove the selector lever assembly and gearshift lever. Refer to: Selector Lever Assembly (307-05 Automatic Transmission External Controls - 6-Speed PowerShift Transmission – DPS6/6DCT250, Removal and Installation). Refer to: Gearshift Lever (308-06 Manual Transmission External Controls - 5-Speed Manual Transmission – B5/IB5/6-Speed Manual Transmission – B6, Re..

Axle. Removal and Installation

Special Tool(s) / General Equipment

Flat Headed Screw Driver Transmission Jack Vehicle/Axle Stands

Removal

NOTICE: Suspension fasteners are critical parts that affect performance of vital components and systems. Failure of these fasteners may result in major service expense. Use the same or equivalent parts if replacement is necessary. Do not use a replacement part of lesser quality or substitute design. Tighten fasteners as specified.

Remove the floor console.
Refer to: Floor Console (501-12 Instrum