Ford Fiesta: Fuel Charging and Controls - 1.6L EcoBoost (132kW/180PS) – Sigma / Fuel Injectors. Removal and Installation
Removal and Installation
-
Refer to: Fuel Rail (303-04B Fuel Charging and Controls - 1.6L EcoBoost (132kW/180PS) – Sigma, Removal and Installation).
General Equipment
Ford diagnostic equipment
Diagnostics
in this manual assume a certain skill level and knowledge of
Ford-specific diagnostic practices...
Materials
Name
Specification
Engine Oil - SAE 5W-20 - Synthetic Blend Motor OilXO-5W20-Q1SP
WSS-M2C945-B1
Removal
WARNING:
Do not work on the fuel system until the pressure has been
released and the engine has cooled...
Other information:
Special Tool(s) /
General Equipment
Feeler Gauge
Check
NOTE:
Refer to the appropriate Section 303-01 for the specification.
NOTE:
Make sure all cylinder head surfaces are clear of
any gasket material, silicone sealant, oil and coolant...
System Diagram
Item
Description
1
PCM
2
Starter Relay
3
Starter Motor
4
BCM
5
Ignition Switch - Push Button Start
6
RFA
7
Clutch Pedal Switch
8
Brake Switch
System Operation
Network Message Chart
Module Network Input Messages Powertrain Control Module (PCM)
..
Categories
Removal
NOTE:
Removal steps in this procedure may contain installation details.
WARNING:
Before beginning any service procedure in this
manual, refer to health and safety warnings in section 100-00 General
Information. Failure to follow this instruction may result in serious
personal injury.
Refer to: Health and Safety Precautions (100-00 General Information, Description and Operation).
Remove the wheel and tire.
Refer to: Wheel and Tire (204-04A Wheels and Tires, Removal and Installation).
read more