Ford Fiesta: Glass, Frames and Mechanisms / Front Door Window Regulator Motor. Removal and Installation

Removal

NOTE: LH side shown, RH side similar.

NOTE: Removal steps in this procedure may contain installation details.

1. Remove the front door trim panel.
   Refer to: Front Door Trim Panel (501-05 Interior Trim and Ornamentation, Removal and Installation).
   

1. Remove the front door window regulator and motor.
   
   • Disconnect the front door window regulator electrical connector and position aside the front door wiring harness.
     
   • Remove the screws.
     Torque: 31 lb.in (3.5 Nm)

Installation

1. To install, reverse the removal procedure.
   

1. If the door is equipped with one touch up/down, carry out the power door window initialization.
   Refer to: Power Door Window Initialization (501-11 Glass, Frames and Mechanisms, General Procedures).